Chipped
or damaged pavers up to 4% are considered to be within acceptable
industry standards. These pavers should be put aside for
use as cuts. Thickness variation of up to +/- 3mm may occur
as allowed by
the Australian Industry Standards. Orders should be checked
for size, colour, and quantity upon delivery. No claims
will be accepted for irregularities or damages after laying
of the product. The installation, faulty
or otherwise and use of this product is out of the control
of the manufacturer, Masterstone Concrete Products, therefore
the only obligation shall be to replace any quantity of
product which is proven defective at
time of delivery. The manufacturer, Masterstone Concrete
Products, is not responsible for any risk or liability or
any consequential damages resulting from the use of the
product.
Masterstone
Concrete Products recommends to seal all pavers with a quality
penetrating sealer. All pavers are salt and slip tested.
Concrete test report 32 MPA.
